application definition, extends NXobject


This is an application definition for raw data from a generic TOF instrument


No symbol table

Groups cited:

NXdata, NXdetector, NXentry, NXinstrument, NXmonitor, NXsample, NXuser


entry: (required) NXentry

title: (required) NX_CHAR

start_time: (required) NX_DATE_TIME

definition: (required) NX_CHAR

Official NeXus NXDL schema to which this file conforms

Obligatory value: NXtofraw

duration: (required) NX_FLOAT

run_number: (required) NX_INT

pre_sample_flightpath: (required) NX_FLOAT {units=NX_LENGTH}

This is the flight path before the sample position. This can be determined by a chopper, by the moderator, or the source itself. In other words: it is the distance to the component which gives the T0 signal to the detector electronics. If another component in the NXinstrument hierarchy provides this information, this should be a link.

user: (required) NXuser

name: (required) NX_CHAR

instrument: (required) NXinstrument

detector: (required) NXdetector

data[ndet, ntimechan]: (required) NX_INT

detector_number[ndet]: (required) NX_INT

distance[ndet]: (required) NX_FLOAT {units=NX_LENGTH}

distance to sample for each detector

time_of_flight[ntimechan]: (required) NX_FLOAT {units=NX_TIME_OF_FLIGHT}

polar_angle[ndet]: (required) NX_FLOAT {units=NX_ANGLE}

polar angle for each detector element

azimuthal_angle[ndet]: (required) NX_FLOAT {units=NX_ANGLE}

polar angle for each detector element

SAMPLE: (required) NXsample

name: (required) NX_CHAR

Descriptive name of sample

nature: (required) NX_CHAR

Any of these values: powder | liquid | single crystal

MONITOR: (required) NXmonitor

mode: (required) NX_CHAR

Count to a preset value based on either clock time (timer) or received monitor counts (monitor).

Any of these values: monitor | timer

preset: (required) NX_FLOAT

preset value for time or monitor

distance: (required) NX_FLOAT {units=NX_LENGTH}

data[ntimechan]: (required) NX_INT

time_of_flight[ntimechan]: (required) NX_FLOAT {units=NX_TIME_OF_FLIGHT}

integral_counts: (required) NX_INT {units=NX_UNITLESS}

data: (required) NXdata

data –> /NXentry/NXinstrument/NXdetector/data

detector_number –> /NXentry/NXinstrument/NXdetector/detector_number

time_of_flight –> /NXentry/NXinstrument/NXdetector/time_of_flight

NXDL Source: