3.3.3.85. NXspm_cantilever_oscillator¶
Status:
base class (contribution), extends NXobject
Description:
In generally speaking a cantilever resembles a leaf-spring which can be treated …
In generally speaking a cantilever resembles a leaf-spring which can be treated as a harmonic oscillator as a first approximation.
Note: If any field data in this group comes in an array as input or output in the scan process they will be stored in NXdata in scan_control group.
Symbols:
No symbol table
- Groups cited:
none
Structure:
reference_amplitude: (optional) NX_NUMBER {units=NX_LENGTH}
The reference amplitude (also called drive amplitude) of the cantilever. …
The reference amplitude (also called drive amplitude) of the cantilever. This is the amplitude of the cantilever oscillation when no external forces are acting on it.
Note: At least one from reference_amplitude, reference_frequency, or reference_phase is expected.
reference_frequency: (optional) NX_NUMBER {units=NX_FREQUENCY}
The reference frequency (also called drive frequency or resonance frequency) o …
The reference frequency (also called drive frequency or resonance frequency) of the cantilever.
Note: At least one from reference_amplitude, reference_frequency, or reference_phase is expected.
reference_phase: (optional) NX_NUMBER {units=NX_ANGLE}
The reference phase of the cantilever oscillator. …
The reference phase of the cantilever oscillator.
Note: At least one from reference_amplitude, reference_frequency, or reference_phase is expected.
frequency_harmonic: (optional) NX_NUMBER {units=NX_DIMENSIONLESS}
The harmonic (e.g., second harmonic of the fundamental frequency) frequency of …
The harmonic (e.g., second harmonic of the fundamental frequency) frequency of the cantilever.
phase_shift: (optional) NX_NUMBER {units=NX_ANGLE}
The phase difference between the reference signal of cantilever and response …
The phase difference between the reference signal of cantilever and response signal.
frequency_shift: (optional) NX_NUMBER {units=NX_FREQUENCY}
Shift in the resonance frequency of the cantilever.
frequency_cutoff: (optional) NX_NUMBER {units=NX_FREQUENCY}
The cutoff frequency of the cantilever.
frequency_bandwidth: (optional) NX_NUMBER {units=NX_FREQUENCY}
The bandwidth of the resonance frequency.
target_amplitude: (optional) NX_NUMBER {units=NX_LENGTH}
The target amplitude of the cantilever to scan on each scan point. …
The target amplitude of the cantilever to scan on each scan point. This field is same as the reference amplitude in the non-contact mode.
target_frequency: (optional) NX_NUMBER {units=NX_FREQUENCY}
The target frequency of the cantilever to scan on each scan point. …
The target frequency of the cantilever to scan on each scan point. This field is same as the reference frequency in the non-contact mode
active_frequency: (optional) NX_NUMBER {units=NX_FREQUENCY}
The active frequency of the cantilever to start the experiment.
Hypertext Anchors¶
List of hypertext anchors for all groups, fields, attributes, links, and symbols defined in this class.